Ghetto Silencers for survival.

Let me first say, that at no time have I ever had, tested, or made one of these Ghetto Silencers. Without the proper tax stamp they are illegal to have, own or use, even for testing purposes. This is for personal knowledge only and in no way is to incurrage anyone into making this or having sex without proper protection.

In some movies you can see people making or using some form of what is commonly called A Silencer, which is a miss-leading term. There is no such thing as a silencer sense they do not completely silence any gun. They are properly referred to as Noise Suppressers. Even the best-built and expensive ones only filter the noise by about 40% dry and wet they will suppress around 50 to 60%.

A Ghetto Suppresser I will talk about here will only suppress about 30 to 40% of the noise dry and if wet, you may get another 5 %.

List of needed items.
1. Small soda bottle with lid, brand is your preference (I like Dr. Pepper myself)
2. Small hand drill with drill bit just about 1/32nd smaller then the outside dia. Of your gun barrel.
3. Roll of Duct Tape, Cameo is better then the sliver, buy the dark green or black if you can get it.
4. A bag of Styrofoam peanuts, (these do not hold water, so not a good wet suppresser) Note 1.
5. A good .22 rifle, I prefer a bolt-action sense there is no mechanical actions of the ejection to make more added sound.

Start by washing the soda bottle and cap out and making sure they are dry before making this Ghetto suppresser.

Mark center of soda bottle cap and bottom of soda bottle. Use drill and bit to drill a hole in the cap as close to center as possible and the bottom of your soda bottle.

Force soda cap onto the end of your rifle barrel all the way up against the front sight or if you don’t have a front sight then about an inch on. If you need to ream the cap a little be careful sense you want as tight a fit as possible.

Fill soda bottle with the Styrofoam peanuts (Note 1.)

Use duct tape to secure bottle cap to barrel of rifle and don’t be stingy with the tape you need it to stay on there.

Screw bottle on to cap and align as close as possible.

Test fire if possible to make sure the hole in the bottom of the bottle is aligned with the path of the bullet.

And there you have it.

Note 1. Other material may be better then Styrofoam Peanuts like cotton, or very light and fine steal wool. I would prefer the fine steal wool myself if I knew how to make one of these and was going to do so.

Always remember that we must be law abiding even thought the Federal Government does not have to.

Opaww

P.S. The accuracy of these is lessened sense the bullet passes through the material you use. So if one was to make something like this and I have no idea why anyone would need it, then be sure to test fire it some to see if your hitting on target.

P.P.S. I do not support the breaking of any law at this time. Nor do I condone the making of this item sense it is illegal to do so.